水電站鋼閘門為廣泛用于給水、、引水、防汛等水利工程建設，鋼壩灌溉鋼制閘門廠家的閘板壓向門框*壓力為0.1MPa，脫離門框*壓力為0.02MPa，滲漏量不大于1.25L/min.m，啟閉時間為5-10min，為附壁式或法蘭式安裝。

  主要由啟閉機、鑄鐵閘門（門框、閘板、閘桿）楔緊裝置、密封座、吊耳等部件組成。密封面上有銅嵌條，保證了密封和耐久性，久用磨損后，鋼壩灌溉鋼制閘門廠家并可通過楔形壓塊高度來保證正常工作。鋼壩灌溉鋼制閘門廠家具有結構合理、封閉性好，安裝、調節、使用、維護方便、性能可靠等特點。

The steel gate of hydropower station is widely used in water supply, water diversion and flood control engineering construction. The pressure of the steel gate of steel dam irrigation factory is 0.1MPa on the gate frame, 0.02MPa on the gate frame, the leakage is not more than 1.25L/min.m, the opening and closing time is 5-10min. It is wall-attached or flange-type installation. 1. It is mainly composed of hoist, cast iron gate (door frame, gate plate, gate rod) wedge tightening device, sealing seat, lifting lug and other components. There are copper inlays on the sealing surface to ensure the sealing and durability. After long-term wear and tear, steel dam irrigation steel gate manufacturers can ensure normal work by wedge-shaped block height. Steel dam irrigation gate manufacturer has reasonable structure, good sealing, installation, regulation, use, easy maintenance, reliable performance and other characteristics.

標簽：鋼閘門 鋼制閘門 鋼制閘門廠家 不銹鋼閘門